MIDDLE EAST TESTING SERVICES W.L.L QATAR

Nutraceutical Testing Services

A jar of vitamin C tablets sits on a pharmacy shelf in Doha. The label says 1,000 mg per tablet, the box is sealed and the price is fair. But the label is only a claim. The real amount may be lower, the tablets may have broken down in a hot warehouse, or the powder inside may carry traces of lead. Nutraceutical testing services check what is actually in a supplement, what should not be there, and whether it stays that way until the expiry date. At METS Laboratories in Qatar, we test supplements so that manufacturers, importers and consumers can rely on the label.

Home   /   Services   /   Nutraceutical Testing

What Is Nutraceutical Testing?

Nutraceutical testing is the laboratory evaluation of products taken for health benefit, such as dietary supplements, vitamins, minerals, herbal products and probiotics. It confirms three things about the product: what it contains, whether it is safe, and how long it stays stable. The checks usually cover:

  • Identity and potency:

    the right ingredient, in the amount the label states.

  • Purity and safety:

    no harmful contaminants, microbes or banned substances.

  • Quality:

    tablets, capsules and powders that are consistent from one unit to the next.

  • Stability:

    how the product holds up over time in its pack.

In Qatar, that covers the vitamins, protein powders, herbal products and probiotics sold through pharmacies, health stores, gyms and online sellers.

Need for Nutraceutical Testing Services

Supplements are taken regularly, often for months, so a small fault can have a lasting effect. Testing is needed because:

  • Consumer safety:

    contamination or the wrong dose can harm health.

  • Label accuracy:

    buyers pay for the amounts the label promises.

  • Registration:

    supplements sold in Qatar must be registered with the Ministry of Public Health (MoPH).

  • Imports:

    many supplements are made abroad, and MoPH-approved laboratories may retest imported supplements to check authenticity and labelling accuracy.

  • Brand protection:

    one failed batch can lead to a recall and lost trust.

Types of Nutraceutical Testing Services

Different stages of a product’s life need different tests. The main types of nutraceutical testing services are:

  • Raw material testing:

    identity of botanical ingredients, purity of vitamins and minerals, and checks for adulterants.

  • Finished product testing:

    assay of active ingredients, uniformity of each dose, and disintegration or dissolution of tablets and capsules.

  • Contaminant testing:

    heavy metals, pesticide residues and mycotoxins.

  • Microbiological testing:

    counts and pathogens.

  • Stability and shelf-life testing:

    expiry dates and storage conditions.

  • Packaging and label checks:

    whether the pack protects the product and the label matches the contents.

  • Banned or undeclared substances:

    screening for ingredients that should not be in the product.

A brand making a product in Qatar and an importer bringing one in usually need a different mix of these nutraceutical testing services.

Dietary Supplement and Vitamin Testing: Checking the Dietary Nutrients

For a dietary supplement and vitamin product, the key question is whether it delivers what the label says. Dietary nutrients are measured by their potency, which means the amount of each active ingredient per tablet, capsule, sachet or millilitre. Typical dietary nutrients tested include:

  • Vitamins, both water-soluble and fat-soluble
  • Minerals and trace elements
  • Amino acids, proteins and omega-3 fatty acids
  • Botanical extracts and other active ingredients

Results are compared with the label claim and the allowed range. Too little means the buyer is shortchanged, and too much may be a safety concern.

Microbial Testing for Supplements

Every dietary supplement and vitamin form, from powders to capsules, tablets and liquids, can carry bacteria, yeast or mould if raw materials or production are not clean. Microbial testing usually covers:

  • Total plate count, and yeast and mould counts
  • Indicator organisms such as coliforms and E. coli
  • Pathogens such as Salmonella and Staphylococcus aureus
  • Probiotic counts, where a product claims live organisms

Quality and Contaminant Testing

For any dietary supplement and vitamin product, quality testing looks for what should not be in it and for consistency from unit to unit. It includes:

  • Toxic metals:

    lead, cadmium, mercury and arsenic, which can occur naturally in raw materials. Qatar’s Pharmacy and Drug Control Department has monitored these metals in supplements submitted for registration.

  • Pesticide residues and mycotoxins:

    especially in herbal and plant-based products.

  • Adulterants:

    cheaper or unlisted ingredients added to a product.

  • Physical quality:

    weight and dose uniformity, and tablet disintegration.

Shelf Life and Stability Testing

Stability testing shows how a supplement changes over time under different storage conditions. It helps to set:

  • Expiry dates:

    how long the label claims can be trusted.

  • Storage conditions:

    the temperature and humidity the product can tolerate.

  • Packaging suitability:

    whether the bottle, blister or sachet protects the contents.

Qatar’s heat and humidity make this especially important. Probiotics and omega-3 products are particularly sensitive to temperature and moisture, and products can spend time in hot warehouses and vehicles before reaching the customer.

Packaging Checks

Packaging protects a supplement from heat, moisture, light and air, and it carries the information the buyer relies on. Packaging checks cover:

  • How well the pack protects the contents over the shelf life
  • Whether the label declaration matches the tested contents
  • Whether the pack and label meet the requirements for sale in Qatar

Nutraceutical Test Methods

Nutraceutical testing services use sensitive instruments, because active ingredients and contaminants are measured in very small amounts. Common methods are:

  • Vitamins and active ingredients:

    high-performance liquid chromatography (HPLC) and UV spectrophotometry.

  • Heavy metals and minerals:

    inductively coupled plasma mass spectrometry (ICP-MS).

  • Volatile compounds and residues:

    gas chromatography with mass spectrometry (GC-MS).

  • Microbiology:

    culture-based counts and pathogen detection, using ISO methods such as ISO 4833 (plate count), ISO 21527 (yeast and mould) and ISO 6579-1 (Salmonella).

  • Tablets and capsules:

    disintegration, dissolution and dose uniformity tests.

Regulatory Bodies and Standards in Qatar

Supplements in Qatar are overseen by the Ministry of Public Health, with standards set at national and Gulf level:

  • Ministry of Public Health (MoPH):

    its Pharmacy and Drug Control Department registers dietary supplements and herbal products, and its Food Safety Department oversees food-related controls.

  • QS GSO 2571:

    Food Supplements.

  • GSO 9:

    labelling of prepackaged foodstuffs.

  • GSO 193 and GSO 2783:

    limits for contaminants and for heavy metals in food.

  • GSO 2333:

    health and nutrition claims on food products.

Foreign manufacturers generally cannot deal with MoPH directly, so registration is made through a local agent and marketing company

Who Needs Nutraceutical Testing Services?

Anyone who makes, imports or sells supplements can need testing, including:

  • Supplement and vitamin manufacturers and private-label brands
  • Importers and distributors preparing products for registration
  • Pharmacies, health stores and online sellers
  • Gyms and sports nutrition suppliers
  • Contract manufacturers and ingredient suppliers

Nutraceutical Testing Services at METS Laboratories

Supplements need testing for contents, contaminants and shelf life together.

  • Potency checks:

    vitamins, minerals and other dietary nutrients measured against the label.

  • Toxic metals:

    lead, cadmium, mercury and arsenic in raw materials and finished products.

  • Microbial checks:

    counts and pathogens in powders, capsules, tablets and liquids.

  • Undeclared substances:

    screening for banned or undeclared ingredients.

  • Stability studies:

    shelf-life work that reflects Qatar’s heat.

Supplements are also tested under METS Lab’s healthcare scope: the Doha, Qatar facility is ISO/IEC 17025 accredited and runs chemical and microbiological testing for pharmaceutical and healthcare products. This supports compliance with Qatar Ministry of Public Health (MoPH) and GCC Standardization Organization (GSO) requirements.

Nutraceuticals that sit close to food are covered as well. The Doha laboratory is ISO/IEC 17025 accredited and provides a complete range of food and beverage testing services. Methods follow Qatari and international standards (GSO, QCS and ISO), supporting the safety, labelling and hygiene benchmarks set by Qatar’s MoPH and global regulatory bodies.

Conclusion

A supplement label shows what a brand promises, while a laboratory report shows what is really in the product and how it holds up over time. For manufacturers preparing a registration file, importers checking a new supplier, or retailers who want proof before stocking a product, nutraceutical testing services give a clear and documented answer. Contact METS Laboratories with your product details and the claims on the label, and we will help you choose the right tests.

Frequently Asked Questions

What products need nutraceutical testing?

Dietary supplements, vitamins, minerals, herbal products, probiotics and functional products in tablet, capsule, powder or liquid form.

Is testing needed to register a supplement in Qatar?

Supplements must be registered with MoPH’s Pharmacy and Drug Control Department. Tell us the product and market, and we will advise which test reports your registration file needs.

How long does shelf-life testing take?

It depends on the storage conditions and the shelf life being claimed, because the product is checked over time.

Can you test for banned or undeclared ingredients?

Yes, screening for banned or undeclared substances is part of supplement testing

Feature Services
whatsapp brands solid full